Making a sewing machine cover
I sent in a yard of gray fabric, cut up into 56 charms ( 5" x 5" squares.) You can see some photos of many of the different fabrics that were sent in, at this Shades of Grey Flickr group.
Ellie Q, the group moderator, got all of our charms, sorted them all out, and mailed back the assortment of 56 different charms squares , all in Shades of Grey !
I had been waiting to make something with these pretty charms, but didn't find the right fabrics to use with them... until last week. I found some ultra -cute DS Quilts Collections Farm Stand Dots Yellow. It has the bigger cream dots, and all of those little polka dots in gray.
DS Quilts Collections Farm Stand Dots Yellow |
A yellow square is paired with a gray square |
I decided to make a block of HST (half square triangles). I diagonally cut the 5" squares through the center, stacked a yellow triangle on top of a gray triangle (right sides together), and sewed them together with a scant 1/4 " seam on the long side. They trimmed up to be 4 1/2" squares.
This block is now 21 1/2 " wide by 11 1/2 " tall. |
I ironed on Pellon Fusible Fleece FF 987 to each section on the back , and quilted some diagonal lines by machine.
I decided to make a gusset, in order to connect the front piece to the back piece, that would cover the whole top of the machine.
I took my tape measure and found that it was 41 " from end to end from the table. This is the gusset length.
Measuring the length needed for the gusset. 41 " I made it 9 1/2 " wide. |
I ironed FF to the back of the gusset piece,and quilted it with some diagonal stitches.
I made a simple fabric handle, from a charm HST block (Didn't want to waste any!)
I ironed 1/4" raw edges folded over on left and right sides WS to WS , made an ironed center crease , folded top raw edge in toward the center crease and ironed it , folded the other raw edge up to the center crease and ironed it, and then folded the top onto the bottom sections, and topstitched on all 4 sides.
After I fold the lower edge up to the center crease, I fold down the top half onto the bottom half. Then topstitched on all 4 sides. |
The handle is attached to the gusset center |
The gusset piece (attached to the front panel here ) is 9 1/2 " tall x 42 " long |
I made sure that the gusset edges were all caught in the seams. |
The gusset is attached to the front and the back sections now |
Lining: Gusset piece- 1 - 42 " wide x 9 1/2 " tall
front and back 2- 20 1/2 " wide x 11 3/4 " tall
I sewed the gusset to the front side piece, and then the back side. (No Fusible Fleece)
I left a 5 inch gap for turning in one of the side seams.
After measuring the outer cover and my lining, I decided to trim off 1 inch all the way around the bottom edge of the cover.
I then turned the outer cover WRONG SIDE OUT, and put the lining inside the cover, with RIGHT SIDES and raw edges TOGETHER. I pinned the raw edges together and sewed with 1/4" seam allowance.
I pressed all along the bottom edge, so that the front now had a "binding" showing, of about 3/4 ".
The light gray is my "simple" binding, without the bulk. Press this and stitch in the ditch |
Stitching in the ditch all the way around the bottom edge |
Last thing to do now! I closed up my turning gap , in the side of the lining, pressed and pinned it, and sewed it by machine.
My Snuggly Sewing Machine Cover |
The side view of the gusset |
Everything is snuggy and warm inside! |
My Gray Butterfly Fabric, with butterflies in yellow fabric |
Somebody else sent gray butterfly fabric, too! |
My Viking is ready to go... no dust getting inside to her, and she's stylin' ! |
I provided these details in a tutorial style.... in case you would want to try to make your own Snuggly Sewing Machine Cover!
Feel free to contact me if you have any questions. ( Be gentle and patient ....I am new at creating tutorials.)
Send me your pictures if you make one.
Update: Check out Craft Gossip.... they are talking about this sewing machine cover on March 4 !
Coming in March.....
Send me your pictures if you make one.
I'm off to my sewing room! |
Coming in March.....
- a new Blog Hop Party hosted by Michelle at Quilting Gallery , starting March 8, with a giveaway from me!
- another sewing machine cover style designed by me
- a new (adorable) bag pattern tested, for Samantha of At Home With Mrs H